Perth, Mar 18, 2008 (ABN Newswire) - The Directors of Sultan Corporation Limited (SCC) are pleased to announce that the samples collected from Hole SJF004 (fourth hole drilled at the John Fardy deposit) have now been assayed.

This intersection is contained within a broader intersection of:

7 metres at 15.02 % Zn, 1.57 % Cu, 0.15 % Pb and 13.4 g/t Ag
from 278 metres down hole.

SJF004 is the fourth hole of Sultan's ongoing drilling programme at its wholly owned John Fardy zinc-copper-lead deposit near Crookwell in NSW.
SJF004 intersected a zone of massive to semi-massive sulphides hosted by felsic volcanics and tuffs.

The midpoint of the mineralization occurs at approximately 250 metres vertically below surface and 202 metres vertically below previously announced SJF001 which also obtained a significant intersection of very high grade zinc with associated copper and lead. This intersection was approximately 30 metres vertically below and 25 metres to the south of the significant intersection in SJF002 and further confirms the high grade tenor of the previously identified near-surface mineralization.

This intersection is by far the most important intersection obtained at such a depth in the ore body.

The John Fardy ore body has previously been regarded as a north-south striking system with the highest grades contained within a very steeply south-plunging shoot.

This latest intersection indicates the south plunge may be shallower than previously thought. It is still open and indicates there is a good possibility of these very high grades extending to depth.

Sultan previously announced significant intersections in holes SJF001 and SJF002 which were respectively:

4 metres at 18.61% Zn, 3.86% Pb, 1.04% Cu, 39.6 g/t Ag and 0.72 g/t Au
from 50-54 metres.

The significant intersection is contained within a broader intersection of: -

9.5 metres at 8.67% Zn, 1.75% Pb, 0.65% Cu and 21 g/t Ag
from 50 to 59.5 metres down hole.

And

4.4 metres at 8.39% Zn, 1.41% Cu, 0.47% Pb and 30 g/t Ag
from 292.6 metres down hole.

The significant intersection is contained within a broader intersection of: -
5.4 metres at 6.96% Zn, 1.23% Cu, 0.30% Pb and 24 g/t Ag

Four drill holes, SJF001-004 have been completed for a total of 1185 meters and samples from SJF002, SJF003 and SJF004 are at the laboratory and results are awaited. These holes are part of an extended programme at John Fardy, Peelwood and Black Springs which will continue for several more months and will eventually total approximately 5000 meters.

Summary details for SJF001, SJF002, SJF003 and SJF004 are given in Table 1 below: -

--------------------------------------------------------------------
Hole No Northing Easting Northing Easting  Azimuth Inclination Total
       (local)  (local) (GDA94)  (GDA94)  (local)              Depth
--------------------------------------------------------------------
SJF001  1520    1300     6223148  722976   90deg   -70deg    100m
SJF002  1460    1040     6223038  722735   92deg   -72deg     326m
SJF003  1460    1000     6223031  722696   92deg   -72deg     438m
SJF004  1460    1080     6223240  723043   91deg   -72deg     321m
--------------------------------------------------------------------

The drilling programme continues.

The information in this report that relates to Exploration Results is based on information compiled by Mr. Kevin Alexander. Mr. Alexander is a full time employee of Sultan Corporation Limited. Mr. Alexander is a member of The Australasian Institute of Mining and Metallurgy and Australian Institute of Geoscientists. He has sufficient experience that is relevant to the style of mineralization under consideration and to the activity which he is undertaking to be qualified as a Competent Person as defined in the 2004 Edition of the "Australasian Code for Reporting on Exploration Results, Mineral resources and Ore Reserves". Mr. Alexander consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.