Anglo Australian Resources NL (ASX:AAR) Continued High Grade Copper-Zinc Intersections Confirmed At The Sandiego Deposit

Sydney, June 22, 2010 AEST (ABN Newswire) - In April 2010 Anglo Australian Resources NL (ASX:AAR) (PINK:AAURF) commenced an extensive drilling program, consisting of approximately 3200m of Reverse Circulation drilling and 1100m of Diamond Core drilling, at the Company's Koongie copper-zinc prospect located 25 km south-west of Halls Creek in the Kimberley region of Western Australia. The program is designed to enhance the potential for economic development of the Koongie Project and to advance the pre-feasibility work that is currently in progress.

A Progress Report on the program was released on 10 May 2010.

The Progress Report noted that Hole SRC061 had returned a wide intersection of strong sulphide mineralisation which on the basis of observation and testing with a hand-held portable Innov-X XRF device was expected to assay high in copper and zinc.

Assay Results for SRC061

Assays recently returned from the Genalysis laboratory in Perth indicate that Hole SRC061 between 101m and 172m downhole intersected.

71m @ 5.04%Cu, 7.69% Zn, 68 g/t Ag and 0.43 g/t Au

From 101m to 116m the drillhole intersected a sub-horizontal zone of chalcocite-rich supergene copper mineralisation that caps the deeper sulphide portion of the Sandiego Deposit. The zone, which is 80-100m below surface, is 200m long and up to 40m wide.

The 15m interval assayed:-

15m @ 9.4% Cu, 0.85% Zn, 214 g/t Ag and 0.19 g/t Au

The 15m downhole length equates to a vertical thickness of approximately 13m for the supergene zone.

From 116m to 172m the hole intersected transitional and primary sulphides that form the bulk of the sub-vertical Sandiego Deposit. The 56m interval assayed:-

56m @ 3.7% Cu, 9.26% Zn, 33 g/t Ag and 0.49 g/t Au

The 56m downhole length equates to a true thickness of approximately 28m for this portion of the Deposit.

The results of Hole SRC061 confirm that the central portion of the Sandiego Deposit is high grade with the existence of particularly high grade copper mineralisation in the supergene cap. The high grade nature of the central portion is further confirmed by Hole SRCD031 which is 42m along strike from Hole SRC061. As reported in December 2008, it returned 68m @ 6.8% Cu, 9.6% Zn, 98.7 g/t Ag and 0.34 g/t Au. The existence of the high grade core to the deposit should positively impact the economics of development.

Continuing Drilling Program

Diamond drilling is continuing to test the Sandiego Deposit at depth. Substantial sulphide occurrences have been intersected in several holes, but assays are not yet available.

The most recent hole, SRCD078 has returned a 15m downhole interval of copper-zinc mineralisation at a vertical depth of approximately 480m below surface and a further mineralised interval at approximately 620m below surface (on Section 1120N).

The latter intersection is the deepest yet obtained at Sandiego.

A more comprehensive statement of the results of the on-going drilling program will be released during July.

Project Development

Studies, in particular metallurgical investigations, continue to support a subsequent and revised Pre-feasibility Study (PFS) to determine the commercial viability of the project.

The results of testwork on the Galvanox Process, completed by the University of British Columbia, have been received and initial indications are that the primary ore is amenable to treatment using the process. A decision on whether further investigations are done will be taken after an options analysis, facilitated by Coffey Mining, is completed. The options will be subjected to a risk analysis and ranked according to NPV and shortlisted options will be subjected to more rigorous analysis in the PFS.

For the complete Anglo Australian Resources announcement, please refer to the following link:
http://www.abnnewswire.net/media/en/docs/63142-ASX-AAR-494986.pdf

Contact

Angus C. Pilmer Executive Director Anglo Australian Resources Tel: +61-8-9382-8822 Peter Komyshan General Manager Exploration Anglo Australian Resources Tel: +61-8-9382-8822