Lithium Power International Ltd Stock Market Press Releases and Company Profile
Amended Preliminary Economic Assessment
Amended Preliminary Economic Assessment

Sydney, Jan 5, 2018 AEST (ABN Newswire) - Lithium Power International Limited (googlechartASX:LPI) ("LPI" or "the Company"), in order to comply with Australian Security Exchange's ("ASX") compliance and regulatory requirements, is pleased to provide an Amended Preliminary Economic Assessment (PEA) for its Maricunga lithium brine project in northern Chile by the Maricunga joint venture company, Minera Salar Blanco (MSB).

It is noted that the content of the PEA remains unaltered, however further disclosure and additional information is provided to allow further compliance with ASX and JORC disclosure requirements.

Highlights

- PEA confirms the high quality of the Maricunga Lithium Brine Project ("the Project"), with the outcomes from the PEA providing a base for further development.

- The Project is progressing to a feasibility study, providing improved certainty regarding reserves, metallurgical design, equipment and operational risks.

- Conventional evaporation pond and process technology to minimise operational risks.

- PEA completed by Tier-1 engineering consultancy WorleyParsons to international standards. Accuracy of operating and capital cost estimates expected within a +/- 25% range.

To ensure appropriate disclosure of information and assumptions used in the PEA full access to the PEA document prepared by WorleyParsons is available from the LPI website http://lithiumpowerinternational.com/

Lithium Power International's Chief Executive Officer, Martin Holland, commented:

"Release of the PEA is a very important step towards becoming a lithium producer. The study demonstrates a very positive and robust outcome that justifies completion of a full feasibility study. The operating expenditure estimate places Maricunga in the lower quartile on the cost curve, at US$2,938/t (excluding KCl). The project has a payback of less than three years. It's important to state that the high level of detail in this study meets international standards."

Executive Summary and Key Study Parameters

The project plan is to produce 20,000t/a of lithium carbonate (LCE), with production of 74,000t/a of potassium chloride (KCl) from year 3 of the project when potash salts have accumulated to a level where continuous processing can be carried out. Key operating and capital costs are summarised in Tables 1 to 3.

The study was based on extraction of an average 222 litres per second (l/s) of brine throughout the project life of 20 years. The brine commences approximately 10cm below the salt lake surface and extends below the base of the proposed bore field at 200m below the surface. Brine will be extracted from a minimum of 13 individual wells, pumping via a central collection pond to the evaporation ponds.

In the evaporation ponds, the brine would be concentrated through evaporation and chemical saturation, with precipitation of different salts, such as halite, sylvinite and carnallite. All salts that precipitate would be periodically harvested from the ponds, and stored in designated stockpiles. The sylvinite and carnallite salts would be sent directly to the KCl processing plant, where through processes of size reduction and classification, flotation, leaching, drying and packaging, KCl fertilizer is obtained.

Concentrated lithium brine from the evaporation ponds would be pumped to the reservoir ponds, from which a Salt Removal Plant would be fed. This plant would remove calcium impurities as calcium chloride and tachyhydrite from the brine. This would be achieved through consecutive evaporation and crystallization steps. This process allows a higher concentration of lithium in the brine.

The concentrated lithium brine obtained from the Salt Removal Plant would then be fed to the lithium carbonate plant, where purification, solvent extraction and filtration remove remaining impurities including calcium, magnesium and boron. The concentrated lithium brine would then be fed to a carbonation stage, where through the addition of soda ash, the lithium carbonate precipitates. This precipitated lithium carbonate would then be fed to a centrifuge for water removal, and final drying, size reduction and packaging. The lithium and potash products would be exported from ports in the second region of Chile, near Antofagasta.

The project has excellent existing infrastructure. The project is located beside one of the international roads connecting Chile and Argentina. High capacity electricity infrastructure is also nearby, providing excellent power options for the project development.

Completion of a definitive feasibility study in the second half of 2018 and securing the project environmental and operating permits will take the Company to the point of final decision to proceed and financial investment.

To view the full Study, please visit:
http://abnnewswire.net/lnk/79800PV9


About Lithium Power International Ltd

Lithium Power InternationalLithium Power International Limited (ASX:LPI) is a pure play lithium company with three distinct project regions to provide diversification. One is located in South America's brine region and three are in Australia's spodumene hard rock areas of Western Australia.

The primary focus is to develop of Chile's next high-grade lithium mine on the Maricunga Salar in an area known as the Lithium Triangle. The Company has also expanded its tenement holdings of lithium exploration prospects in Western Australia.

https://twitter.com/LithiumPowerLPI https://www.linkedin.com/company-beta/17892940?pathWildcard=17892940 abnnewswire.com 


Contact

Martin C Holland - CEO
Lithium Power International
E: info@lithiumpowerinternational.com
T: +61-2-9276-1245
www.lithiumpowerinternational.com
Twitter: @LithiumPowerLPI



ABN Newswire
ABN Newswire This Page Viewed:  (Last 7 Days: 7) (Last 30 Days: 27) (Since Published: 6658)