Baobab Resources plc Stock Market Press Releases and Company Profile

View in Other Languages Baobab Resources Plc (LON:BAO) Resultados Iniciais de Perfuração Apontam para Maior Qualidade à Entrada e Menores Custos Operacionais Baobab Resources Plc(LON:BAO)初次钻探结果预示入选品位提高、运营成本降低的前景 Baobab Resources Plc(LON:BAO)初次鑽探結果預示入選品位提高、運營成本降低的前景 Baobab Resources Plc (LON:BAO) Initial Drill Results Point Toward Higher Head Grades and Lower Operating Costs 
Initial Drill Results Point Toward Higher Head Grades and Lower Operating Costs
Initial Drill Results Point Toward Higher Head Grades and Lower Operating Costs

London, Feb 12, 2014 AEST (ABN Newswire) - Baobab Resources Plc (googlechartLON:BAO) ('Baobab' or the 'Company') is pleased to provide the following update on initial drill results relating to the measured resource estimation of the Tenge resource block at the Company's Tete pig iron and ferro-vanadium operation in Mozambique.


- The 2013 drilling campaign was focused on converting the upper portions of the Tenge resource block, representing the first 10 to 15 years of the operation, to a JORC compliant Measured category.

- International geology and mining specialist, SRK Consulting (South Africa), have been commissioned to complete the resource estimate by end Q1 2014.

- Analytical results have been returned from the first 10 reverse circulation ('RC') Tenge resource drill holes with significant intercepts reporting an average head grade of 42% Fe. These results are substantially higher than the current 36% Fe of the 553Mt combined Tenge/Ruoni resource and in line with the weighted average of 45% Fe reported from channel sampling of two large trenches straddling the enriched summit of Tenge mountain (see RNS dated 20 December 2013 for details).

- An anticipated c.17% increase in head grade is likely to result in lower annual run-of-mine tonnages and consequently lower overall mining costs per ton of pig iron produced.

- Bulk samples collected from the Tenge trenches have been processed at the Mintek laboratories in South Africa and are being despatched, along with bulk coal and carbonate samples, to pilot plant facilities in the USA and Japan for reduction test work.

- Un-fluxed bench scale smelting test work carried out by CSIRO in 2013 confirmed that a low impurity pig iron product could be produced using Baobab's iron ore and local Mozambique thermal coal (refer to RNS dated 4 March 2013 for details). Further fluxed smelting test work is nearing completion and will provide the first empirical data on the composition of the vanadium and titanium slag by-products. Results are expected to become available in the coming weeks.

Commenting today, Ben James, Baobab's Managing Director, said: 'The RC results to date offer particular encouragement as they point towards the potential for higher head grades at Monte Tenge. This will have a significant impact on mining and processing costs over the first decade of production.'


Tenge/Ruoni is the easternmost prospect area of the Massamba Group, Tete Project. Mineralisation in the area has been synformally folded with the fold hinge plunging gently to the west-northwest. The northern and southern limbs of the fold comprise the Ruoni North and Ruoni South resource blocks, while the outcropping fold hinge comprises the Tenge resource block to the east. The buried central portion of the fold comprises the Ruoni Flats resource block.

During the 2011 and 2012 field seasons the Company completed c.35,000m of diamond and reverse circulation (RC) drilling across all four Tenge/Ruoni resource blocks culminating the estimation of a JORC compliant combined resource of 553Mt @ 36% Fe, 0.4% V2O5 and 13.3% TiO2, of which 335.8Mt was classified as Inferred and 217.3Mt was classified as Indicated. A further 173.9Mt of inferred resources were also estimated at the Chitongue and South Zone blocks to the west, resulting in a global resource base of 727Mt (please refer to RNS dated 3 April 2013 for details on all resource estimates).

Drilling programmes during 2013 focused on converting the upper portions of the Tenge resource block, representing a minimum 10 years of operation, to a JORC complaint Measured category. 49 drill holes were completed for an aggregate total of 5,940m (11 diamond holes for 1,401m and 38 RC holes for 4,905m).

Analytical results for the first 10 RC drill holes have been returned, the significant results for which are tabulated below. The average head grade of significant intercepts reported is 42% Fe, 0.5% V2O5 and 15.8% TiO2 with the Davis Tube Recovery (DTR) concentrate grades reporting a weighted average of 58% Fe, 0.8% V2O5 and 13.4% TiO2 at a mass recovery of 47%.

Analysis of all remaining drill hole samples is on target for completion and compilation by the end of February. Internationally recognised geology and mining specialist, SRK Consulting (South Africa), has been commissioned to review and update the Tenge resource estimate. The revised estimate is scheduled to be finalised by end Q1 2014. For more information on SRK Consulting, please visit

To view the tabled drill results, please visit:

About Baobab Resources plc

Baobab Resources plc (LON:BAO)Baobab Resources plc (LON:BAO) is a Mozambican-focused explorer with a large landholding in the central north of the country. The company's flagship project is the Tete iron ore deposit. 


Baobab Resources PLC
Ben James: Managing Director
Tel: +258 21 415 200

Jeremy Dowler: Chairman
Tel: +44 1372 450529

Frank Eagar: CFO
Tel: +258 21 415 200

Grant Thornton UK LLP
Philip Secrett | David Hignell | Jamie Barklem
Tel: +44 20 7383 5100

Shore Capital Stockbrokers
Jerry Keen | Toby Gibbs
Tel: +44 20 7468 7964

Fortbridge Consulting
Matt Beale
Tel: +44 7966 389 196

ABN Newswire
ABN Newswire This Page Viewed:  (Last 7 Days: 15) (Last 30 Days: 83) (Since Published: 12640) 

View in Other Languages 22197158591288612640 (63582)