Magnis Energy Technologies Limited Stock Market Press Releases and Company Profile

View in Other Languages Magnis Energy Technologies Limited (ASX:MNS) Exciting Extra Fast Charging Battery Results Magnis Energy Technologies Limited (ASX:MNS) Aufregende Ergebnisse beim Extra-Schnellladen von Akkus Magnis Energy Technologies Limited (ASX:MNS) 令人兴奋的超快充电电池结果 Magnis Energy Technologies Limited (ASX:MNS) エキサイティングな超高速充電バッテリーの結果 Magnis Energy Technologies Limited (ASX:MNS) Resultados emocionantes de batería de carga extra rápida Magnis Energy Technologies Limited (ASX:MNS) 놀라운 초고속 충전 배터리 결과 Magnis Energy Technologies Limited (ASX:MNS) Resultados emocionantes da bateria de carregamento extra rápido Magnis Energy Technologies Limited (ASX:MNS) Résultats passionnants de batterie à charge ultra-rapide Magnis Energy Technologies Limited (ASX:MNS) 令人興奮的超快充電結果 Magnis Energy Technologies Limited (ASX:MNS) Hasil Pengisian Baterai Ekstra Cepat yang Menyenangkan Magnis Energy Technologies Limited (ASX:MNS) มอบผลลัพธ์การชาร์จแบตเตอรี่ที่รวดเร็วเป็นพิเศษ Magnis Energy Technologies Limited (ASX:MNS) Захватывающие результаты сверхбыстрой зарядки аккумулятора 
Exciting Extra Fast Charging Battery Results
Exciting Extra Fast Charging Battery Results

Sydney, Dec 31, 2021 AEST (ABN Newswire) - Magnis Energy Technologies Limited (ASX:MNS) (U1P:FRA) (MNSEF:OTCMKTS) is very pleased to announce significant results from the EFC battery program achieved using 7Ah commercial cells. The cells are developed using BMLMP technology by Magnis' partner, Charge CCCV, LLC. ("C4V"). Magnis has a 9.65% stake in C4V.

Extra Fast Charging Results

The FC program previously announced on 22 June 2021 recently ended in a huge success. The program used 2-3Ah cells which had a retention rate of over 60% at 2C-2C rates (30 min charge and 30 min discharge) after over 6000 cycles and at that point the decision was made to fast track the EFC program using larger commercial cells.

There were minor delays in the installation of high voltage power into the building to run these tests as the charge current needed is as high as 70 Amp.

The EFC program has cells currently running with a 15 min charge and variable discharge rate as part of initial test protocols. To date the results received have been very exciting with over 250 cycles achieved without any capacity loss.

The plan is to take this program to over 3000 cycles and then run new programs at a higher current to achieve a 10-minute charge and then onto a 6-minute charge.

The optimised cell is still within 95% energy density of a regular energy cell, which means minimal energy density loss. Such high-power density without any Cobalt and Nickel for a Non-LFP cell makes C4V's technology a leader in the marketplace.

The tests were done at 90% DOD which equates to a maximum energy being infused and withdrawn during charge and discharge cycles. These cells were made with standard scalable processes as well as materials used from highly qualified suppliers which will allow the scale-up of the technology with limited variability leading to a speedy launch in the marketplace.

Significance of Results

Industries that require EFC or FC include the transportation industry as they are constantly on the road and the results announced today could be a game changer for them. The real significance comes from the number of cycles coupled with the charging times.

Traditionally batteries used in the EV industry currently have up to 80% retention after approximately 1,000 cycles using lower charging rates. When constant fast charging rates are applied the battery life decreases dramatically.

Today's results show no capacity loss after 250 cycles using a 15-minute charge.

NYSERDA New York State EFC Bus Program

The NYSERDA EFC Bus Program started with several delays from all parties with battery packs having been provided in Q2 2021. The feedback to date has been very positive with specific data expected in Q1 2022.

The Program is funded by NYSERDA and has the purpose of illustrating that C4V EFC technology can be applied to State Transit Buses in New York State.

C4V President Dr Shailesh Upreti commented: "We are making significant progress in terms of changing the cell architecture and our recipe to develop extra fast charge designs. Our ultimate goal is to achieve 10,000+ cycles with 10C rates (6 min charge time) and in the past 12 months we have gained significant insight that has allowed us to make significant progress towards that goal. Our no-oxide (oxygen deprived) alongside with no Cobalt and Nickel technology allows us to go extreme on charge and discharge rates without generating a lot of heat to compromise safety."

Magnis Chairman Frank Poullas commented: "Owners of EV's will understand the importance of EFC/FC technologies which are also imperative for a number of industries and today's initial results using commercial cells are very exciting."

"We look forward to providing further results in the near future and working towards producing these cells for commercial use at the iM3NY Lithium-ion Battery Plant."

*To view the battery performance chart, please visit:

About Magnis Energy Technologies Limited

Magnis Energy TechnologiesMagnis Energy Technologies Limited (ASX:MNS) (OTCMKTS:MNSEF) (FRA:U1P)  is involved in and has strategic investments in several aspects of the electrification supply chain including manufacturing of green credentialed lithium-ion battery cells, leading edge battery technology and high quality, high performance anode materials. The company's vision is to enable, support and accelerate the green energy transition critical for the adoption of Electric Mobility and Renewable Energy Storage.



Frank Poullas
Executive Chairman
Ph: +61 2 8397 9888

Related Companies

Magnis Energy Technologies Limited              

ABN Newswire
ABN Newswire This Page Viewed:  (Last 7 Days: 24) (Last 30 Days: 75) (Since Published: 7050) 

View in Other Languages 7050 3157 2578 2190 2162 2138 1936 1885 1743 1719 1415 1403  (29376)